IDE productivity enhancements: formatting, dynamic error markers, and debugger hot swapping IDE生产力增强:格式化、动态的错误标记,和调试器热交换
A dynamic error model for CMMs during high speed scanning measurement 高速扫描三坐标测量机动态误差模型
This paper makes research mainly on the influence which the probe system, machine structure and measuring system have on the dynamic error of CMMs. 重点研究了测头系统、机体结构、测量系统对测量机动态误差的影响。
In studying the pulse measurement, dynamic error is produced, mainly by acceleration. A compensation algorithm for acceleration is advanced based on the theoretical dynamic model. 针对脉冲推力测量过程中所产生的误差,提出了一种基于理论动力学模型的加速度补偿算法。
Research on the Key Technique of the CMM Spatial Dynamic Error Correcting Method 三坐标测量机空间动态误差修正关键技术研究
Dynamic Error and Compensation in Noncircular Crankshaft Grinding 曲轴非圆磨削运动中动态误差及补偿
Dynamic Error Analysis and Numerical Compensation of Pressure in Bore Measuring System 膛压测试系统动态误差分析及其数字补偿
Dynamic error compensation for time interleaved ADC system 时间交替ADC系统的一种动态误差补偿方法
Research on dynamic error of high speed forcing press with clearance 含间隙高速压力机机构的动态误差传递规律研究
Aiming at dynamic error during measuring pulverized-coal concentration by general heat balance method, a dynamic compensation soft measurement method is introduced. 针对常规热平衡法煤粉浓度测量存在动态误差的问题,提出对一次测量量进行变系数动态补偿的软测量方法。
Extracting Dynamic Error of Accelerometer Tested on Three-axis Turntable by Quaternion 用四元数法提取加速度计三轴转台测试中的动态误差量
An Effective Method of Reducing the Dynamic Error and the Stable Tracking Time of the Sighting Device 减小瞄准具动态误差、缩短稳定跟踪时间的有效方法
It can improve the dynamic testing precision of sensor to correct the dynamic error, and is of great significance. 修正动态误差可以提高传感器动态测试的精度,具有重要意义。
Relation of Dynamic Error Analysis System and Pulse Wave Velocity Measure 动态误差分析系统与脉搏波速度测定系统的关系
A dynamic error analysis of the Z axis of a bridge-type 3-D coordinate measuring machine is made theoretically and experimentally. A kinetic analysis of the Z axis is made. 分别从理论上和实验上对移动桥式三坐标测量机Z轴运动的动态误差进行了分析,对Z轴进行了力的分析。
It is possible for this dynamic error estimation method to be applied in other multi-beam surveying system. 该方法可以推广应用到其它多波束测量声呐系统的动态测量误差分析与估计中。
It is discussed that the system error and dynamic error, especially the dynamic error in position algorithm. 讨论了捷联式惯性导航系统的误差,对位置计算中的涡卷误差进行了推证。
The method of compensation for dynamic error in three point guidance for transversely maneuvering targets was studied. 本文研究了一种补偿目标横向机动时激光驾束三点法导引动态误差的方法。
It can be used as fine control component and static state error compensation or dynamic error compensation component. 它既可作为微进给和微调部件,也可作为工艺系统误差的静态和动态补偿部件。
Analysis on dynamic error and research on real-time arithmetic models for reheat steam unit in on-line performance monitoring. 中间再热式机组性能在线监测中的动态误差分析及实时算法模型研究。
This paper improves greatly the correcting method of frequency domain for sensor's dynamic error, and enlarges its scope of application. A more reasonable correcting transfer function is adopted, the correcting precision is raised. 本文对传感器动态误差的频域修正方法作了较大改进,扩大了它的应用范围,采用更为合理的修正传递函数,提高了修正精度。
Their static and dynamic error estimation are also given. 最后给出了动静态误差预算。
This paper presents a method of the dynamic error compensation of piezoelectric gyro based on wavelet filter. 提出了一种基于小波滤波的补偿压电陀螺动态误差的方法。
The method is proved effective by the simulation experimental results of thin-film thermocouple dynamic error compensation. 最后,通过对薄膜热电偶动态测量误差补偿的仿真实验,验证了该方法的有效性。
And the kinematic and dynamic error models of robot are derived. 特别是对机器人末端执行器位置、速度和加速度的影响,并且推导了考虑这些因素的机器人运动递推方程,建立了机器人运动误差和动力误差模型。
The paper gives a way to reduce the dynamic error using A/ D converter in the threshold circuit. 文中还介绍了在门槛电路中使用A/D变换器来减小动态误差的一种方法。
Paper establishes the dynamic error model, and analyzes the affection on the measurement; discusses the component software development process and corrects the error of the measurement and structure parameter. 建立了仪器运动测量造成的动态误差模型,分析了动态误差对测量的影响,论述了基于构件式软件开发过程,并对样机进行了测量误差和结构参数误差修正。
To ensure the measurement accuracy, the factors affecting the measurement accuracy of the triangular intersection method are analyzed, the optimum measuring range is determined and the measuring experiment of the dynamic error of the spatial location based on the stereo vision is designed. 为保证测量精度,分析了三角交汇法中影响测量精度的因素,确定了最佳测量范围,设计了基于立体视觉的空间位置动态误差测量实验,并分析了测量精度。
Static and dynamic error models of inertial sensors are deduced from the types of interferential torque and dynamic principle. 根据干扰力拒的类型和刚体转动的动力学原理,推导了陀螺仪和加速度计的静态和动态误差模型。
Calibration and compensation of dynamic error is the key technology to improve the precision of strapdown inertial navigation system. 动态误差标定与补偿是提高捷联惯性导航系统精度的关键技术。